Chapter 10 Exam Question Answers 2013 – Routing Protocols (Version 5.0) – RP

1
Which IOS 12.4 software package integrates full features, including voice, security, and VPN capabilities, for all routing protocols?

Advanced Security
Advanced IP Services
Advanced Enterprise Services
Service Provider Services

The Advanced Enterprise Services package is a premium package for IOS 12.4 that integrates support for all routing protocols with voice, security, and VPN capabilities.

This item references content from the following areas:
Routing Protocols
10.1.1 Naming Conventions

2
What is the major release number in the IOS image name c1900-universalk9-mz.SPA.152-3.T.bin?

2
3
15
52
1900

The part of the image name 152-3 indicates that the major release is 15, the minor release is 2, and the new feature release is 3.

This item references content from the following areas:
Routing Protocols
10.1.1 Naming Conventions

3
What statement describes a Cisco IOS image with the “universalk9_npe” designation for Cisco ISR G2 routers?

It is an IOS version that can only be used in the United States of America.
It is an IOS version that provides only the IPBase feature set.
It is an IOS version that offers all of the Cisco IOS Software feature sets.
It is an IOS version that, at the request of some countries, removes any strong cryptographic functionality.‚Äč

To support Cisco ISR G2 platforms, Cisco provides two types of universal images. The images with the “universalk9_npe” designation in the image name do not support any strong cryptography functionality such as payload cryptography to satisfy the import requirements of some countries. The “universalk9_npe” images include all other Cisco IOS software features.

This item references content from the following areas:
Routing Protocols
10.1.1 Naming Conventions

4
Which statement describes a difference between the IOS 15.0 extended maintenance release and a standard maintenance release?

They consist of two separate parallel trains.
The extended maintenance release will deliver new IOS features as soon as they are available.
The standard maintenance release enables faster IOS feature delivery than the extended maintenance release does.
A new standard maintenance release will synchronize with the latest extended maintenance release before the extended is made available.

IOS 15.0 use a different release model for the traditional separate mainline and technology trains of 12.4. Instead of diverging into separate trains, Cisco IOS Software 15 M and T will have extended maintenance (EM) releases and standard maintenance (T) releases single software train. Extended Maintenance (EM) releases are available approximately every 20 months. Standard maintenance (T releases) enable faster Cisco feature delivery before the next EM release becomes available. In other words, there will be several standard maintenance releases between two extended maintenance releases. An extended maintenance release incorporates the features and hardware support of all the previous standard maintenance releases. This makes the newer extended maintenance release contain the full functionality of the train at the time of release.

This item references content from the following areas:
Routing Protocols
10.1.1 Naming Conventions

5
When a router is powered on, where will the router first search for a valid IOS image to load by default?

RAM
ROM
flash memory
NVRAM
By default, if no boot system commands are in the configuration, a router will load the first valid Cisco IOS image in flash memory and run it. RAM is active memory that is not used to store image files. NVRAM stores configuration files. ROM stores a minimal version of the Cisco IOS image that can be used to provide limited functions if a valid IOS image is not available in flash memory.

This item references content from the following areas:
Routing Protocols
10.1.2 Managing Cisco IOS Images

6
A network engineer is upgrading the Cisco IOS image on a 2900 series ISR. What command could the engineer use to verify the total amount of flash memory as well as how much flash memory is currently available?
show flash0:
show version
show interfaces
show startup-config

This item references content from the following areas:
Routing Protocols
10.1.2 Managing Cisco IOS Images

7
The customer of a networking company requires VPN connectivity for workers who must travel frequently. To support the VPN server, the customer router must be upgraded to a new Cisco IOS software version with the Advanced IP Services feature set. What should the field engineer do before copying the new IOS to the router?

Set the router to load the new IOS image file directly from the TFTP server on the next reboot.
Delete the currently installed IOS by using the erase flash: command, and reload the router
Issue the show running-configuration command to determine the features of the currently installed IOS image file.
Issue the show version and the show flash commands to ensure that the router has enough memory and file space to support the new IOS image.

The current version of IOS can be verified by using the show version command. Use the Cisco web site and the Cisco Feature Navigator to determine specific features available within a particular IOS version.

This item references content from the following areas:
Routing Protocols
10.1.2 Managing Cisco IOS Images

8
A network administrator configures a router with the command sequence:

R1(config)# boot system tftp://c1900-universalk9-mz.SPA.152-4.M3.bin
R1(config)# boot system rom

What is the effect of the command sequence?

On next reboot, the router will load the IOS image from ROM.
The router will copy the IOS image from the TFTP server and then reboot the system.
The router will load IOS from the TFTP server. If the image fails to load, it will load the IOS image from ROM.
The router will search and load a valid IOS image in the sequence of flash, TFTP, and ROM.

The boot system command is a global configuration command that allows the user to specify the source for the Cisco IOS Software image to load. In this case, the router is configured to boot from the IOS image that is stored on the TFTP server and will use the ROMmon imagethat is located in the ROM if it fails to locate the TFTP server or fails to load a valid image from the TFTP server.

This item references content from the following areas:
Routing Protocols
10.1.2 Managing Cisco IOS Images

9
Beginning with the Cisco IOS Software Release 15.0, which license is a prerequisite for installing additional technology pack licenses?
IPBase
DATA
UC
SEC

Cisco IOS Software release 15.0 incorporates four technology packs. They are IPBase, DATA, UC (unified Communications), and SEC (Security). Having the IPBase license installed is a prerequisite for installing the other technology packs.

This item references content from the following areas:
Routing Protocols
10.2.1 Software Licensing

10
Which three software packages are available for Cisco IOS Release 15.0?
DATA
IPVoice
Security
Enterprise Services
Unified Communications
Advanced IP Services
Cisco IOS Release 15.0 has four available technology software packages.
IPBase
DATA
Unified Communications
Security

This item references content from the following areas:
Routing Protocols
10.2.1 Software Licensing

11
When a customer purchases a Cisco IOS 15.0 software package, what serves as the receipt for that customer and is used to obtain the license as well?

Software Claim Certificate
End User License Agreement
Unique Device Identifier
Product Activation Key

A customer who purchases a software package will receive a Product Activation Key (PAK) that serves as a receipt and is used to obtain the license for the software package.

This item references content from the following areas:
Routing Protocols
10.2.1 Software Licensing

12
Which command would a network engineer use to find the unique device identifier of a Cisco router?

show version
show license udi
show running-configuration
license install stored-location-url

The license install stored-location-url command is used to install a license file. The show version and show running-configuration commands display router configuration and other details, but not the UDI.

This item references content from the following areas:
Routing Protocols
10.2.1 Software Licensing

13
A newly hired network engineer wants to use a 2911 router from storage. What command would the technician use to verify which IOS technology licenses have been activated on the router?

show flash0:
show interfaces
show license
show startup-config
show version

This item references content from the following areas:
Routing Protocols
10.2.1 Software Licensing

14
Which command is used to configure a one-time acceptance of the EULA for all Cisco IOS software packages and features?

license save
show license
license boot module module-name
license accept end user agreement

The license save command is used to back up a copy of the licenses on a device. The show license command is used to display additional information about Cisco IOS software licenses. The license boot module module-name command activates an Evaluation Right-To-Use license. To configure a one-time acceptance of the End User License Agreement (EULA) covering all Cisco IOS packages and features, use the license accept end user agreement command.

This item references content from the following areas:
Routing Protocols
10.2.2 License Verification and Management

15
How long is the evaluation license period for Cisco IOS Release 15.0 software packages?

15 days
30 days
60 days
180 days

Evaluation licenses are good for a 60 day period. After 60 days the evaluation license will automatically change to a Right-To-Use license.

This item references content from the following areas:
Routing Protocols
10.2.2 License Verification and Management

16
Fill in the blank. Do not use abbreviations.
The license flash0:seck9-C1900-SPE150_K9-FAB12340099.xml command will restore the specified saved Cisco IOS Release 15 license to a router.

This item references content from the following areas:
Routing Protocols
10.2.2 License Verification and Management

17

Question as presented:

chapter10
universalk9=specifying the feature set
1=minor release number
mz=where the image runs and if the file is compressed
c1900=platform on which the image runs
M4=maintanence release and rebuild number
4=new feature release number
bin=file extension
15=major release number

This item references content from the following areas:
Routing Protocols
10.1.1 Naming Conventions

18

Question as presented:
technology train
branches from another train
has the latest features

mainline train
possibly is 12.4
contains mostly bug fixes

This item references content from the following areas:
Routing Protocols
10.1.1 Naming Conventions

Tags: , , , , , , , , , , , , , , , , , , , , , ,

3 Comments

Leave a Reply